Ⅵ型水平吊杆
VI Horizontal Hoist
GSPⅥ
特點概述
★ 全新的一代水平吊杆，結構緊湊，便于安裝；
★ 杆體與纜筐合二爲一，使占用空間高度低至400mm，非常适合應用于層高很低的演播室使用；
★ 采用吊裝方式安裝，适用于無設備層的場所；
★ 可選王字型軌道和圓管作爲挂燈部件，王字型軌道配有燈具滑車，便于燈具移動位置；
★ 可配置多達6路的強電回路（插座可按客戶要求選型）、4路DMX512信号和以太網，适用于多種應
用場合；
★ 配置多種安全保護裝置，确保吊杆運行安全可靠；
★ 可配置高精度位置傳感器，實現吊杆精确定位。
升降限位器2
Type2 limit switch
提升機組
Gear motor
配套導向輪組件
Guide Pulley
位置傳感器
Position sensor
挂燈滑車4輪
4-wheel light trolley
挂燈滑車6輪
6-wheel light trolley
Features Overview
★ It is the new generation of horizontal hoist. Compact construction and easy to install;
★ Beacuse of the cable basket is embedded into the batten, the height of batten is
compressed to 400mm. It is very suitable for low-ceiling studio.
★ Installing on the bottom of steel beam, it is suitable for studio without grid.
★ Rails and steel pipe can be selected to install lights. Lights can move along with the rail by
means of trolley.
★ Up to 6 power sockets ,4 DMX512 signal and EtherNet can be installed. The type of power
sockets can be determined by the clients. It is suitable for various of applications.
★ There are variety of safety protection devices to guarantee that the operation is safe and
reliable.
★ The high accuracy position sensor is adopted which realizes the accurate positioning.
